Name: ADG1204YRUZ
Brand: Hotenda
SKU: ADG1204YRUZ
Price: 6.31000 USD
Availability: InStock

new-10%

ADG1204YRUZ

Manufacturer part number:ADG1204YRUZ

Manufacturer:Hotenda

Description:85ns, 110ns SP4T 190Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG1204 14 Pins 100pA 15V 14-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:ADG1204YRUZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	14
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	120Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.3mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1204
Pin Count	14
Operating Supply Voltage	12V
Number of Channels	4
Interface	Parallel
Number of Circuits	1
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	170μA
Nominal Supply Current	170μA
Power Dissipation	1.3mW
Max Supply Current	285μA
Throw Configuration	4PST
Propagation Delay	150 ns
Turn On Delay Time	120 ns
Number of Inputs	4
Bandwidth	800MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	90 ns
On-State Resistance (Max)	190Ohm
High Level Output Current	45mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	85 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	1.5pF 4.2pF
On-state Resistance Match-Nom	3.5Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	85ns, 110ns
Charge Injection	-0.7pC
Channel-to-Channel Matching (ΔRon)	6 Ω
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	85ns
Drain to Source Resistance	120Ohm
Voltage - Supply, Dual (V±)	±15V
Height	1mm
Length	5mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1204YRUZ Product Details

ADG1204YRUZ Overview

The electronic component is convenient to ship overseas because it is packed in a 14-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tube provides high reliability. It is mounted in the position Surface Mount. 4:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~125°C TA. The total number of terminations is 14. As a result of its 4 channels, this electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. A total of 14 pins are injected into the body of the electronic part. Based on SP4T switching circuits, these analog multiplexers work. The multiplexer consists of 1 circuits. Use ADG1204 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 120Ohm. Datasheets for functions of 14 pins are available. Multiplexer or Switches is a typical switch device. This multiplexer would work with 170μA current. If you put voltage higher than 285μA on the digital multiplexer, damage may occur. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. A voltage of 12V can be used to operate the electronic component. A 4 input needs to be operated. There are various bandwidths available for data transfer. There is 120Ohm resistance between the Drain and Source on this part.