Name: FSA266L8X
Brand: ON Semiconductor
SKU: FSA266L8X
Price: 0.67000 USD
Availability: InStock

new-10%

FSA266L8X

Manufacturer part number:FSA266L8X

Manufacturer:ON Semiconductor

Description:3.2ns, 4.1ns SPST - NO 10Ohm QUAD Analog Switches FSA266 100nA 2.3V 8-UFQFN

Case Package:SOT-23

Datasheet:FSA266L8X Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-UFQFN
Number of Pins	8
Weight	25mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2005
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	10Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	250mW
Technology	CMOS
Terminal Position	QUAD
Number of Functions	2
Supply Voltage	2.3V
Terminal Pitch	0.5mm
Base Part Number	FSA266
Output	SEPARATE OUTPUT
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Power Dissipation	250mW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	10 ns
Supply Type	Single
Turn-Off Delay Time	10.5 ns
-3db Bandwidth	300MHz
On-State Resistance (Max)	10Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	55 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	5pF
On-state Resistance Match-Nom	0.5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	3.2ns, 4.1ns
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-70dB @ 10MHz
Switch-on Time-Max	5.6ns
Switch-off Time-Max	6.9ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Normal Position	NO
Height Seated (Max)	0.55mm
Length	1.6mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

FSA266L8X Product Details

FSA266L8X Overview

The electronic component is convenient to ship overseas because it is packed in a 8-UFQFN. The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 8. As a result of its 2 channels, this electronic component provides high-quality output. An 2.3V voltage supply should allow the electrical part to be turned on and run. Based on SPST - NO switching circuits, these analog multiplexers work. Use FSA266 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 10Ohm. Datasheets for functions of 8 pins are available. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. A low voltage of 1.65V should be applied to the electronic component. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. A total of SEPARATE OUTPUT outputs are available on this analog switch ic.