Name: DG407DN-E3
Brand: Vishay Siliconix
SKU: DG407DN-E3
Price: 9.81000 USD
Availability: InStock

new

DG407DN-E3

Manufacturer part number:DG407DN-E3

Manufacturer:Vishay Siliconix

Description:200ns, 150ns 100Ohm QUAD Analog Switches BREAK-BEFORE-MAKE DG407 28 Pins 500pA 15V 28-LCC (J-Lead)

Case Package:SOT-23

Datasheet:DG407DN-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	12 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	28-LCC (J-Lead)
Number of Pins	28
Weight	1.182714g
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2014
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
Resistance	100Ohm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	450mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG407
Pin Count	28
Operating Supply Voltage	15V
Number of Channels	8
Number of Circuits	2
Max Supply Voltage	44V
Min Supply Voltage	7.5V
Operating Supply Current	30μA
Power Dissipation	450mW
Max Supply Current	500μA
Propagation Delay	350 ns
Turn On Delay Time	600 ns
Logic Function	Multiplexer
Number of Inputs	16
Voltage - Supply, Single/Dual (±)	12V ±5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	300 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	69 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	8pF 65pF
On-state Resistance Match-Nom	5Ohm
Switch Time (Ton, Toff) (Max)	200ns, 150ns
Charge Injection	15pC
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	400ns
Height	3.69mm
Length	12.57mm
Width	12.57mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG407DN-E3 Product Details

DG407DN-E3 Overview

Packed in 28-LCC (J-Lead), the electronic component is convenient for shipping overseas. Advanced packaging method Tube is used to provide high reliability. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Extended operating temperature around -40°C~85°C TA. There are 28 terminations totally. By its 8 channels, the electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. 28 pins are injected to the electronic part body. This multiplexer is composed of 2 circuits. If you are looking for variants of the digital switch, trying search with DG407. This digital multiplexer has 100Ohm internal resistance. Please refer to the datasheets for 28 pins functions. In a normalsituation, users should not supply the switches with voltage higher than 44V. A cost-effective Dual, Single supply type analogue multiplexer. The lowest voltage fed to the electronic component should be 7.5V. 30μA current would be enough for this multiplexer to operate. If put voltage greater than 500μA on the device, damage may be caused to the analogue multiplexer. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. You should attach at least 5V voltage if you are using dual power supply. The electronic component can function from 15V. The electrical component supports 16 inputs.