74LVTH162374MEA Overview
The package is in the form of 48-BSSOP (0.295, 7.50mm Width). The Tubepackage contains it. In the configuration, Tri-State, Non-Invertedis used as the output. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. Powered by a 2.7V~3.6Vvolt supply, it operates as follows. It is operating at -40°C~85°C TA. D-Typedescribes this flip flop. It belongs to the 74LVTHseries of FPGAs. This D flip flop should not have a frequency greater than 160MHz. There are 2 elements in it. During its operation, it consumes 190μA quiescent energy. Members of the 74LVTH162374family make up this object. A JK flip flop with a 4pFfarad input capacitance is used here. The electronic part is mounted in the way of Surface Mount. This board has 48 pins. A Positive Edgeclock edge trigger is used in this device. An electronic part with 16bits has been designed. The superior flexibility of this product is achieved by using 2 circuits. Optimal efficiency requires a supply voltage of 3.3V. It operates with 3 output lines. As of now, there are 2input lines. A -12mAvalue is set for the high level output current. Low level output current is set to 12mA. The operating temperature should be lower than 85°C. A temperature above -40°Cshould be used for the operation. The minimal supply voltage is 2.7V. There is a maximum voltage support of 3.6V. The frequency can be set to 150MHz.
74LVTH162374MEA Features
Tube package
74LVTH series
48 pins
16 Bits
74LVTH162374MEA Applications
There are a lot of ON Semiconductor 74LVTH162374MEA Flip Flops applications.
- Instrumentation
- Memory
- Frequency Dividers
- High Performance Logic for test systems
- Synchronous counter
- Test & Measurement
- Power down protection
- Buffered Clock
- ESD protection
- Pattern generators
