CAT1320WI-28-GT3 Overview
There are 8 terminals connected to this power management, which makes it easy to mount. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. IC management conducts in a 1-voltage supply. The power management is mounted by Surface Mount. In total, IC powers are 8 pins on the board. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 3V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The supply current of the power management is 3mA. Additionally, there are many other features that can be found inside of the power management, such as [0]. You can always use CAT1320, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature that PMIC chip can work with is 3mA.
CAT1320WI-28-GT3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
3mA operating supply current
CAT1320WI-28-GT3 Applications
There are a lot of ON Semiconductor CAT1320WI-28-GT3 Voltage Supervisors applications.
- Magnetic resonance imaging
- Dash board
- DC stabilized power supply module
- Kitchen appliances
- Radar
- External alarm
- Battery cars
- Network equipment
- Leakage protection
- Computer applications
