CAX810ZTBI-T3 Overview
It is mounted through 3 terminals on the power management. There is a Tape & Reel (TR)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. There are a total of 3 pins on power management. 3 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~85°C TA degrees. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. If you want to search for similar IC managements of this manufacturer, you can always refer to CAX810, which is the base power ics number.
CAX810ZTBI-T3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
CAX810ZTBI-T3 Applications
There are a lot of ON Semiconductor CAX810ZTBI-T3 Voltage Supervisors applications.
- Consumer electronics
- Stable power system
- Telecommunications equipment
- Detection of phase sequence
- Electrical fire monitoring system
- Sensitive sensors
- Important electronics for automotive protection
- Power distribution systems of ICU
- Multi-voltage system
- Important electronics for automotive safety
