BU4210FVE-TR Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. A Tape & Reel (TR) package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SOT-665 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. There is a voltage supply of 2.4V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Surface Mount. The power management system can be categorized as a Power Management Circuits chip. A total of 5 pins are located on this power management. This power management system has 5 pins. It is recommended that Vsup should not be less than 900mV for this IC power. Voltage (Vsup) shouldn't exceed 7V volts in this PMIC. Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 550nA. To find similar IC managements from the manufacturer, you can always search by BU42*. A maximum supply temperature of 1.75μA can be used with this power management.
BU4210FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 900mV
550nA operating supply current
BU4210FVE-TR Applications
There are a lot of ROHM Semiconductor BU4210FVE-TR Voltage Supervisors applications.
- Set top box
- Linux and server computing
- Multi-voltage system
- Leakage protection
- Medical-specific insulation monitor
- Battery cars
- Radio
- Rechargeable batteries
- Dash board
- Military communications
