CAT1025LI-28-G Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Packaged in the form of a Tube, power management is easy to use. The purpose of this IC management is to provide you with a reference of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for 8-DIP (0.300, 7.62mm) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. When a supply voltage of 3.3V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. Through Hole mounts IC management. In total, the power management has 8 pins in it. 8 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2.7V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Through Hole mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 3mA. As well as this, there are other features to mention such as [0], for example. To find similar IC managements from the manufacturer, you can always search by CAT1025. The maximum supply temperature voltage supervisor can handle is 3mA.
CAT1025LI-28-G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current
CAT1025LI-28-G Applications
There are a lot of ON Semiconductor CAT1025LI-28-G Voltage Supervisors applications.
- DC stabilized power supply module
- Military electronics
- Battery cars
- Smart meter
- Insulation fault location system
- Stable power system
- DSP
- Electrical fire monitoring system
- Microprocessor system
- WiFi router
