74VHC574SJX Overview
The flip flop is packaged in a case of 20-SOIC (0.209, 5.30mm Width). There is an embedded version in the package Tape & Reel (TR). In the configuration, Tri-State, Non-Invertedis used as the output. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A 2V~5.5Vsupply voltage is required for it to operate. In the operating environment, the temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. This type of FPGA is a part of the 74VHC series. This D flip flop should not have a frequency greater than 115MHz. D latch consists of 1 elements. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If you search by 74VHC574, you will find similar parts. It is powered by a voltage of 3.3V . This JK flip flop has a 4pFfarad input capacitance. In this case, the D flip flop belongs to the AHC/VHCfamily. This electronic part is mounted in the way of Surface Mount. The 20pins are designed into the board. Its clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. There are 8bits in this flip flop. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). Normal operation requires a supply voltage (Vsup) above 2V. Its superior flexibility is attributed to its use of 8 circuits. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. This D flip flop is equipped with 0 ports. There are 2 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. It consumes a total of 4μA quiescent current at any given time.
74VHC574SJX Features
Tape & Reel (TR) package
74VHC series
20 pins
8 Bits
74VHC574SJX Applications
There are a lot of ON Semiconductor 74VHC574SJX Flip Flops applications.
- Parallel data storage
- Data transfer
- Pattern generators
- EMI reduction circuitry
- Instrumentation
- Common Clocks
- Buffered Clock
- Single Up Count-Control Line
- Latch
- Bus hold
