MC74AC574DWR2G Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). A package named Tape & Reel (TR)includes it. As configured, the output uses Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. Surface Mountmounts this electrical part. A voltage of 2V~6Vis required for its operation. Currently, the operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. This type of FPGA is a part of the 74AC series. You should not exceed 95MHzin its output frequency. The element count is 1 . Currently, there are 20 terminations. You can search similar parts based on 74AC574. Power is supplied from a voltage of 5V volts. The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Devices in the ACfamily are electronic devices. There is an electronic part mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device exhibits a clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. Flip flops designed with 8bits are used in this part. It reaches the maximum supply voltage (Vsup) at 6V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. Its flexibility is enhanced by 8 circuits. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. This D flip flop is equipped with 0 ports. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. With an output current of 24mA, this device offers maximum design flexibility. To operate, the chip has a total of 3 output lines. As a result, it consumes 8μA of quiescent current without being affected by external factors.
MC74AC574DWR2G Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
MC74AC574DWR2G Applications
There are a lot of ON Semiconductor MC74AC574DWR2G Flip Flops applications.
- Latch
- Convert a momentary switch to a toggle switch
- Load Control
- Matched Rise and Fall
- Consumer
- Safety Clamp
- Parallel data storage
- Storage registers
- Modulo – n – counter
- Frequency division
