74VHC175MTCX Overview
16-TSSOP (0.173, 4.40mm Width)is the packaging method. It is included in the package Tape & Reel (TR). T flip flop uses Differentialas its output configuration. It is configured with a trigger that uses Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 2V~5.5V volts. The operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. FPGAs belonging to the 74VHCseries contain this type of chip. You should not exceed 115MHzin the output frequency of the device. There are 1 elements in it. A total of 16 terminations have been made. Members of the 74VHC175family make up this object. Power is provided by a 3.3V supply. This T flip flop has a capacitance of 4pF farads at the input. In this case, the D flip flop belongs to the AHC/VHCfamily. There is an electronic part that is mounted in the way of Surface Mount. 16pins are included in its design. This device's clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. An electronic part designed with 4bits is used in this application. 5.5Vis the maximum supply voltage (Vsup). Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. It operates from 2/5.5V power supplies. Its output current of 8mAallows for maximum design flexibility. In terms of quiescent current, it consumes 4μA . It is of 4 channels.
74VHC175MTCX Features
Tape & Reel (TR) package
74VHC series
16 pins
4 Bits
2/5.5V power supplies
74VHC175MTCX Applications
There are a lot of ON Semiconductor 74VHC175MTCX Flip Flops applications.
- Latch-up performance
- Dynamic threshold performance
- Data transfer
- Shift Registers
- ESCC
- Parallel data storage
- Frequency Divider circuits
- Modulo – n – counter
- Common Clocks
- Data Synchronizers
