N74F579N,602 Overview
The device is packaged in the 20-DIP (0.300, 7.62mm)type. This configuration uses 20terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. An interconnection of 1elements is provided by wires. All component pins are equal to 20. There is a package in the form of Tube. In this case, it belongs to the family of [0]. Due to the fact that it is a member of the 74Fseries, it has a wide range of applications. Logic type Binary Counter is adopted. Ideally, the operating temperature should be set to 0°C~70°C. This device is mounted in the Through Holeposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 8bits for each element. It is important to note that TCO OUTPUT; MULTIPLEXED I/Oare really important features of this electronic device. Further related parts may be found under the base part number 74F579. From the voltage source, there is a voltage of 5V volts. As low as 4.5V Vsup is the minimum supply voltage. It is possible to provide a voltage up to 5.5V (Vsup).
N74F579N,602 Features
Embedded in the 20-DIP (0.300, 7.62mm) package
8 bits per element
TCO OUTPUT; MULTIPLEXED I/O
N74F579N,602 Applications
There are a lot of NXP USA Inc.
N74F579N,602 Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- Digital multiplexing and demultiplexing
- Signal gating
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
