74HC93DB,118 Overview
The device is packaged in the 14-SSOP (0.209, 5.30mm Width)type. This configuration uses 14terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. An interconnection of 1elements is provided by wires. All component pins are equal to 14. There is a package in the form of Tape & Reel (TR). In this case, it belongs to the family of [0]. Due to the fact that it is a member of the 74HCseries, it has a wide range of applications. Logic type Binary Counter is adopted. Ideally, the operating temperature should be set to -40°C~125°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 4bits for each element. It is important to note that DIVIDE BY 2 AND DIVIDE BY 8 FUNCTIONSare really important features of this electronic device. Further related parts may be found under the base part number 74HC93. As low as 2V Vsup is the minimum supply voltage. It is possible to provide a voltage up to 6V (Vsup).
74HC93DB,118 Features
Embedded in the 14-SSOP (0.209, 5.30mm Width) package
4 bits per element
DIVIDE BY 2 AND DIVIDE BY 8 FUNCTIONS
74HC93DB,118 Applications
There are a lot of NXP USA Inc.
74HC93DB,118 Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- Digital multiplexing and demultiplexing
- Signal gating
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
