74LVC574APW,112 Overview
It is packaged in the way of 20-TSSOP (0.173, 4.40mm Width). A package named Tubeincludes it. There is a Tri-State, Non-Invertedoutput configured with it. This trigger uses the value Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. With a supply voltage of 1.65V~3.6V volts, it operates. In this case, the operating temperature is -40°C~125°C TA. This D latch has the type D-Type. The 74LVCseries comprises this type of FPGA. Its output frequency should not exceed 200MHz. D latch consists of 1 elements. As a result, it consumes 10μA of quiescent current without being affected by external factors. There are 20 terminations,If you search by 74LVC574, you will find similar parts. A voltage of 2.7V is used as the power supply for this D latch. This T flip flop has a capacitance of 5pF farads at the input. Electronic devices of this type belong to the LVC/LCX/Zfamily. There is an electronic part that is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. There is a clock edge trigger type of Positive Edgeon this device. This flip flop is designed with 8 Bits. In this case, the maximum supply voltage (Vsup) reaches 3.6V. The flip flop has 2embedded ports. Currently, there are 8 lines of input. As a result, it consumes 100nA of quiescent current without being affected by external factors. In addition, you can refer to the additinal BROADSIDE VERSION OF 374 of the D latch.
74LVC574APW,112 Features
Tube package
74LVC series
20 pins
8 Bits
74LVC574APW,112 Applications
There are a lot of Nexperia USA Inc. 74LVC574APW,112 Flip Flops applications.
- Reduced system switching noise
- ESD performance
- Data transfer
- Parallel data storage
- Event Detectors
- Matched Rise and Fall
- Computing
- Differential Individual
- Storage Registers
- Supports Live Insertion
