74LVC4066D-Q100J Overview
Packed in 14-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~125°C TA extended. Total terminations are 14. A 1 channel electronic part produces high-quality output. If the voltage supply is 3.3V volts, the electrical component should be turned on and run. The electrical component body receives 14 pins. SPST - NO switching circuits are used in these analog switch ics. There are 4 circuits in this switch device. Use 74LVC4066 to search for variants of the digital switches. In this multiplexer, the internal resistance is 15Ohm. A voltage higher than 5.5V should not normally be supplied to the switches. Digital switch that provides Single power at a cost-effective price. The lowest voltage fed to the electronic component should be 1.65V. For this digital switch to work, 40μA current would suffice. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. From the Automotive, AEC-Q100 series.
74LVC4066D-Q100J Features
1 Channels
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 500MHz
74LVC4066D-Q100J Applications
There are a lot of Nexperia USA Inc. 74LVC4066D-Q100J Analog Switches & Multiplexers ICs applications.
- Intelligent PBX
- PBX interfaces
- Cable PC
- Sample-and-hold systems
- Data switching
- Sample hold systems
- SONET
- DSLAMs
- Mechanical reed relay replacement
- E1 Multiplexer
