74LVC16374ADL,118 Overview
48-BSSOP (0.295, 7.50mm Width)is the way it is packaged. As part of the package Tape & Reel (TR), it is embedded. T flip flop uses Tri-State, Non-Invertedas its output configuration. JK flip flop uses Positive Edgeas the trigger. Surface Mountis in the way of this electric part. It operates with a supply voltage of 1.65V~3.6V. Temperature is set to -40°C~125°C TA. This electronic flip flop is of type D-Type. FPGAs belonging to the 74LVCseries contain this type of chip. You should not exceed 300MHzin the output frequency of the device. A total of 2elements are present in it. There is a consumption of 20μAof quiescent energy. It is a member of the 74LVC16374 family. The input capacitance of this JK flip flopis 5pF farads. In this case, the electronic component is mounted in the way of Surface Mount. A total of 48pins are provided on this board. There is a clock edge trigger type of Positive Edgeon this device. It is designed with 16bits. Due to its superior flexibility, it uses 2 circuits. There are 8 output lines in this JK flip flop. It is reported that there are 8 input lines. It consumes 100nA current. A -24mAvalue is set for the high level output current. It is set to 24mAfor the low level output current. Ideally, the operating temperature should be lower than 125°C. Ideally, the operating temperature should be higher than -40°C. In order for it to operate, a supply voltage of 1.2Vis required. The maximum supply voltage supported by the flip flop is 3.6V. It is possible to achieve a frequency of 80MHz.
74LVC16374ADL,118 Features
Tape & Reel (TR) package
74LVC series
48 pins
16 Bits
74LVC16374ADL,118 Applications
There are a lot of Nexperia USA Inc. 74LVC16374ADL,118 Flip Flops applications.
- Balanced 24 mA output drivers
- Parallel data storage
- ESD protection
- Supports Live Insertion
- Event Detectors
- Clock pulse
- Count Modes
- Pattern generators
- Data storage
- Reduced system switching noise
