74HCT174PW,118 Overview
It is packaged in the way of 16-TSSOP (0.173, 4.40mm Width). Package Tape & Reel (TR)embeds it. Non-Invertedis the output configured for it. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. In this case, the operating temperature is -40°C~125°C TA. D-Typedescribes this flip flop. JK flip flop belongs to the 74HCTseries of FPGAs. There should be no greater frequency than 69MHzon its output. The element count is 1 . As a result, it consumes 8μA quiescent current and is not affected by external forces. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This D latch belongs to the family of 74HCT174. A voltage of 5V is used to power it. Its input capacitance is 3.5pF farads. This D flip flop belongs to the family of HCT. Surface Mount mounts this electronic component. It is designed with 16 pins. It has a clock edge trigger type of Positive Edge. The flip flop is designed with 6bits. If high efficiency is desired, the supply voltage should be kept at 5V. Currently, there are 6 input lines present.
74HCT174PW,118 Features
Tape & Reel (TR) package
74HCT series
16 pins
6 Bits
74HCT174PW,118 Applications
There are a lot of Nexperia USA Inc. 74HCT174PW,118 Flip Flops applications.
- Consumer
- Test & Measurement
- Count Modes
- Circuit Design
- Memory
- Storage registers
- High Performance Logic for test systems
- Data transfer
- Clock pulse
- Load Control
