Name: 74HCT4052BQ-Q100,1
Brand: Nexperia USA Inc.
SKU: 74HCT4052BQ-Q100,1
Price: 0.67000 USD
Availability: InStock

new-10%

74HCT4052BQ-Q100,1

Manufacturer part number:74HCT4052BQ-Q100,1

Manufacturer:Nexperia USA Inc.

Description:60ns, 48ns SP4T 150Ohm QUAD Analog Switches BREAK-BEFORE-MAKE 74HCT4052 16 Pins 2μA 5V 16-VFQFN Exposed Pad

Case Package:SOT-23

Datasheet:74HCT4052BQ-Q100,1 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-VFQFN Exposed Pad
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2010
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	210Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation	500mW
Technology	CMOS
Terminal Position	QUAD
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.5mm
Base Part Number	74HCT4052
Output	COMMON OUTPUT
Pin Count	16
Operating Supply Voltage	5V
Number of Channels	8
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	320μA
Power Dissipation	500mW
Propagation Delay	18 ns
Turn On Delay Time	105 ns
Logic Function	Demultiplexer, Multiplexer
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
Supply Type	Dual, Single
Bandwidth	180MHz
Turn-Off Delay Time	75 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	150Ohm
Min Dual Supply Voltage	1V
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	2μA
Channel Capacitance (CS(off), CD(off))	3.5pF
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	60ns, 48ns
Channel-to-Channel Matching (ΔRon)	6 Ω
Crosstalk	-60dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Height Seated (Max)	1mm
Length	3.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

74HCT4052BQ-Q100,1 Product Details

74HCT4052BQ-Q100,1 Overview

As the electronic part is packed in 16-VFQFN Exposed Pad, international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~125°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 8 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. The electrical component body receives 16 pins. Circuits based on SP4T switching are used to construct these analog switch ics. There are 2 circuits in this switch device. Try searching with 74HCT4052 to find analog multiplexer variants. An switch multiplexer with 210Ohm internal resistance has a value of 210Ohm. Datasheets for 16 pin functions are available upon request. Multiplexers should not be powered above 5.5V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 4.5V. An operating current of 320μA would be sufficient for this switch device. Despite this switch device's dual supply capability, its voltage should not exceed 5V. It is recommended that you attach at least 1V to your dual power supply. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. COMMON OUTPUT outputs are utilized by this digital multiplexer. 5V operating voltages can be used with this electrical part. There are 180MHz bandwidths for data transfer. The series starts with Automotive, AEC-Q100.