74HC174D,653 Overview
It is embeded in 16-SOIC (0.154, 3.90mm Width) case. D flip flop is embedded in the Tape & Reel (TR) package. This output is configured with Non-Inverted. JK flip flop uses Positive Edgeas the trigger. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. A temperature of -40°C~125°C TAis considered to be the operating temperature. There is D-Type type of electronic flip flop associated with this device. This type of FPGA is a part of the 74HC series. You should not exceed 107MHzin its output frequency. In total, it contains 1 elements. 16terminations have occurred. D latch belongs to the 74HC174 family. An input voltage of 5Vpowers the D latch. Its input capacitance is 3.5pFfarads. This D flip flop belongs to the family of HC/UH. A part of the electronic system is mounted in the way of Surface Mount. A total of 16pins are provided on this board. This device exhibits a clock edge trigger type of Positive Edge. This flip flop is designed with 6 Bits. It reaches the maximum supply voltage (Vsup) at 6V. Normal operation requires a supply voltage (Vsup) above 2V. For high efficiency, the supply voltage should be kept at 5V. There are 6 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. There is a consumption of 8μAof quiescent current from it.
74HC174D,653 Features
Tape & Reel (TR) package
74HC series
16 pins
6 Bits
74HC174D,653 Applications
There are a lot of Nexperia USA Inc. 74HC174D,653 Flip Flops applications.
- Balanced 24 mA output drivers
- Single Up Count-Control Line
- Buffered Clock
- Functionally equivalent to the MC10/100EL29
- Safety Clamp
- Matched Rise and Fall
- Counters
- Supports Live Insertion
- Instrumentation
- Latch-up performance
