74AVC16374DGG,112 Overview
It is packaged in the way of 48-TFSOP (0.240, 6.10mm Width). Package Tubeembeds it. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 1.2V~3.6Vis used as the supply voltage. The operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. In this case, it is a type of FPGA belonging to the 74AVC series. You should not exceed 350MHzin the output frequency of the device. In total, there are 2 elements. This process consumes 40μA quiescents. You can search similar parts based on 74AVC16374. The input capacitance of this JK flip flopis 5pF farads. There is an electronic component mounted in the way of Surface Mount. A total of 48pins are provided on this board. This device has Positive Edgeas its clock edge trigger type. 16bits are used in its design. 200nAquiescent current consumed. High level output current is set to -12mA. In the low level output current setting, the current is set to 12mA. There should be a temperature below 85°Cduring operation. Ideally, the operating temperature should be greater than -40°C. Despite its minimal supply voltage of 1.4V, it is capable of operating. It supports a maximum supply voltage of 3.6V volts. It is possible to achieve 350MHz frequencies.
74AVC16374DGG,112 Features
Tube package
74AVC series
48 pins
16 Bits
74AVC16374DGG,112 Applications
There are a lot of Nexperia USA Inc. 74AVC16374DGG,112 Flip Flops applications.
- Supports Live Insertion
- Convert a momentary switch to a toggle switch
- Memory
- Buffer registers
- Load Control
- Instrumentation
- Pattern generators
- Computers
- Automotive
- Event Detectors
