SN74LVC1G79DCKRE4 Overview
As a result, it is packaged as 5-TSSOP, SC-70-5, SOT-353. Package Tape & Reel (TR)embeds it. T flip flop is configured with an output of Non-Inverted. JK flip flop uses Positive Edgeas the trigger. Surface Mountis positioned in the way of this electronic part. A voltage of 1.65V~5.5Vis used as the supply voltage. In the operating environment, the temperature is -40°C~125°C TA. This electronic flip flop is of type D-Type. JK flip flop belongs to the 74LVCseries of FPGAs. Its output frequency should not exceed 160MHz. As a result, it consumes 10μA of quiescent current without being affected by external factors. 5terminations have occurred. The 74LVC1G79 family contains this object. It is powered from a supply voltage of 1.8V. This JK flip flop has a 4pFfarad input capacitance. It is a member of the LVC/LCX/Zfamily of D flip flop. Surface Mount mounts this electronic component. This board is designed with 5pins on it. This device has the clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. Flip flops designed with 1bits are used in this part. The superior flexibility is achieved through the use of 1 circuits. As a result of its reliable performance, this T flip flop is suitable for TR. An electrical current of 3.3V volts is applied to it. It offers maximum design flexibility with its output current of 32mA.
SN74LVC1G79DCKRE4 Features
Tape & Reel (TR) package
74LVC series
5 pins
1 Bits
3.3V power supplies
SN74LVC1G79DCKRE4 Applications
There are a lot of Texas Instruments SN74LVC1G79DCKRE4 Flip Flops applications.
- Latch-up performance
- Modulo – n – counter
- Circuit Design
- Balanced 24 mA output drivers
- Storage registers
- Set-reset capability
- Instrumentation
- Individual Asynchronous Resets
- Data transfer
- Parallel data storage
