MP6400DJ-30-LF-Z Overview
There are 6 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tube. In this IC power you will find 1 functions for you to refer to. There are 1 channels available on this supervisor, and each channel has a different function. Please find attached SOT-23-6 Thin, TSOT-23-6 functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. Taking into account all of the pins, this power management has a total of 6. This power management has 6 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.8V. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. Surface Mount mounting is recommended. You should set the supervisor's temperature during -40°C~85°C TA . Power management has an output of Open Drain or Open Collector during operation.
MP6400DJ-30-LF-Z Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.8V
MP6400DJ-30-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP6400DJ-30-LF-Z Voltage Supervisors applications.
- Power distribution systems of CCU
- Detection of phase loss
- Fire equipment power monitoring system
- Leakage current detection
- Power distribution systems of operating room
- Personal computers
- DSP
- Data storage applications
- Computer applications
- Medical-specific insulation monitor
