MAX16042TP+T Overview
There are 16 terminals on this power management that allow it to be mounted. A Tape & Reel (TR) package is used to package the power management. For your reference, this IC power includes a list of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 3 channels. In this IC management you will find 20-WFQFN Exposed Pad functions for you to refer to. This IC power shares lots of benefits with other Sequencer products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 3.3V is applied to the power ic, it conducts. IC management conducts in a 3-voltage supply. By Surface Mount, IC management has been mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 16 pins on power management. The pins of the power management system count 20. There should be a minimum voltage supply (Vsup) of 2.2V for this PMIC. This IC power should be powered by no more than 28V volts of supply voltage (Vsup). In this case, Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a supply current of 52μA for the power management. A similar IC managements number of the manufacturer can always be found by using MAX16042, the base power ics number.
MAX16042TP+T Features
Sequencer type
Minimum supply voltage of 2.2V
52μA operating supply current
MAX16042TP+T Applications
There are a lot of Maxim Integrated MAX16042TP+T Voltage Supervisors applications.
- DC stabilized power supply module
- Electric heating appliances
- Functional modules
- Radio
- Consumer electronics
- Battery cars
- Microcontroller system
- Cloud computing
- emergency room
- FPGA design
