MP2207DN-LF Overview
As a result of the use of the Tube package, the performance of this voltage regulator is optimized. In this voltage regulator, there are a total of 8 terminations. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. The harley voltage regulator is available as a 8-SOIC (0.154, 3.90mm Width) Exposed Pad package to save space. A total of 1 outputs are configured in this voltage regulator. On its output pins, this adjusting voltage regulator generates Adjustable output. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. As long as its operating temperature is -40°C~85°C TA, dc to dc voltage regulator should perform well. This DC-DC switching regulator has a switching frequency of 1.3MHz. Voltage regulators like this one can operate at least with 3V as the dc to dc voltage regulator's minimum input voltage. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.8V. A maximum design flexibility is provided by the 4A output current of voltage regulator. There is a maximum input voltage of 16V for this voltage regulator 12v. Its 260 peak reflow temperature makes this regulator essentially indestructible. An input voltage of 12V is required to meet the requirements of the switching regulator operation. DC DC switching regulator is part of the Switching Regulator or Controllers subcategory and can be found in the Switching Regulator or Controllers category. There should be at least a 800mV volt output voltage for this switching regulator in order to make it work properly. The maximum output voltage of this regulator voltage is 14.4V.
MP2207DN-LF Features
1 outputs
Peak reflow temperature (Cel) of 260
MP2207DN-LF Applications
There are a lot of Monolithic Power Systems Inc. MP2207DN-LF Voltage Regulators applications.
- Motor controller circuits
- Sink circuits
- Thermal power
- Experimental setup
- Wide-range voltage regulation circuits
- Imported equipment
- Constant current circuits
- Remotely powered electric motors
- Direct power supply system
- Analog precision reference circuits
