MT46H16M16LFBF-6:H Overview
In terms of its memory type, it can be classified as Volatile. Case Tray is available. It is available in 60-VFBGA case. There is an 256Mb 16M x 16 memory capacity on the chip. As with most mainstream devices, this one uses DRAM-format memory. Due to its wide operating temperature range, this device can be used in a wide variety of demanding applications. It is capable of handling a voltage supply of 1.7V~1.95V. The recommended mounting type for this device is Surface Mount. A total of 60 terminations have been planted on the chip. In total, 1 functions are supported by this part. Memory devices such as this one are designed to be powered by 1.8V and should be used as such. It has a clock frequency of 166MHz. It is common to select similar parts by referring to the device's base part number, MT46H16M16. The memory device has an 60-pin package, which encloses it in a small package. The memory device has a total of 60 pins, thus indicating that it has a total of 60 memory locations. According to the datasheet, this memory chip operates at an operating voltage of 1.8V. In this chip, Surface Mount mounting is used, a straightforward, high-efficiency mounting method. This memory chip is rated 100mA for its nominal supply current. Despite all the merits of this chip, it also has AUTO/SELF REFRESH to boost system performance. 1 ports allow read/write access to one memory address in this chip. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number.
MT46H16M16LFBF-6:H Features
Package / Case: 60-VFBGA
60 Pins
Operating Supply Voltage:1.8V
Additional Feature:AUTO/SELF REFRESH
I/O Type: COMMON
MT46H16M16LFBF-6:H Applications
There are a lot of Micron Technology Inc. MT46H16M16LFBF-6:H Memory applications.
- embedded logic
- Camcorders
- hard disk drive (HDD)
- main computer memory
- multimedia computers
- eSRAM
- networking
- data buffer
- printers
- eDRAM
