TCM811TERCTR Overview
Power management is mounted through 4 terminals. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. To assist you, this IC power includes 1 functions. Power management consists of 1 channels, each of which can be used independently. In this PMIC, you can find TO-253-4, TO-253AA functions for your reference. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 3.3V is used to conduct the PMIC chip. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by Surface Mount. The power management belongs to the Power Management Circuits subcategory. It has a total of 4 pins that are attached to IC management. The pins of the power management system count 4. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. For this power management, there is an 4.75μA volt supply current. It is always advisable to use TCM811T, the base supervisor number, when searching for similar PMICs from the manufacturer. It is necessary to have 3.3V volts of power in order for this voltage supervisor to operate.
TCM811TERCTR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
4.75μA operating supply current
TCM811TERCTR Applications
There are a lot of Microchip Technology TCM811TERCTR Voltage Supervisors applications.
- Precision measurement
- Military electronics
- Magnetic resonance imaging
- Analog circuit
- Insulation fault location system
- Personal computers
- Consumer electronics
- Set top box
- Data storage applications
- Power distribution systems of CCU
