MAX6732AUTSYD3+T Overview
A total of 6 terminals are used to mount this power management. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. A series of 1 channels can be found on this supervisor. Please refer to power management for SOT-23-6 functions. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 2 is used to conduct the PMIC chip. The power management is mounted by a Surface Mount-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 6 pins on power management. Pin count of the power management is 6. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~125°C. During operation, this power management system outputs Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 15μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6732A, which is the base power ics number. This power management requires 1/5V power to work.
MAX6732AUTSYD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6732AUTSYD3+T Applications
There are a lot of Maxim Integrated MAX6732AUTSYD3+T Voltage Supervisors applications.
- Important electronics for automotive safety
- Electric heating appliances
- Leakage protection
- Display equipment
- Electrical fire monitoring system
- Radar
- Radio
- Low voltage/high power - AI, GPU
- Important electronics for automotive protection
- Power distribution systems of CCU
