TC9402CPD Overview
This is included in the 14-DIP (0.300, 7.62mm) package. Located in Through Hole, this electronic component is mounted. Currently, there is a package in the way of Tube. There is a device of the type Volt to Frequency and Frequency to Volt being used. There is a technique known as 14 termination, in which a transmission line is terminated with a device that matches its characteristic impedance. The device is equipped with a pin count of 14. 5V is the supply voltage that supplies power to the device. There are several parts that can be founded that are related to the base part number. On computers and other communication devices, there are pins called 14 pins, which are pronged contacts. This device is designed to operate at a minimum operating temperature 0°C to ensure its reliability. To ensure the reliability of the device, the maximum operating temperature is 70°C. It has been mounted in the way of Through Hole. When the supply voltage (Vsup) exceeds 8V, it should be used. It is ensured that the supply voltage (Vsup) reaches the maximum value 15V. The frequency at which it operates is given by 100kHz. The operating supply of this electrical device is voltage 12V. An electrical supply voltage of 5V is used to power this device. There is a type Dual, Single supply on this electronic part. Input type -2V is the most negative that can be used for this electronic component. 23V is the output voltage supported by the device. For this electrical device, there is a bandwidth of 100 kHz.
TC9402CPD Features
14-DIP (0.300, 7.62mm) package
14 terminations
14 pin count
14 pins
A dual supply voltage of 5V
TC9402CPD Applications
There are a lot of Microchip Technology
TC9402CPD V/F & F/V Converters applications.
- Horn Control
- Touch or Sound Switches
- lsolation of High Common-Mode Voltages
- Low-Cost Analog-to-Digital Conversion
- Battery Monitoring
- Automotive Sensing
- Voltage to Frequency Conversions
- Frequency to Voltage Conversions
- Remote-Sensor Monitoring
- Tachometers
