ADVFC32KNZ Overview
It is included in the 14-DIP (0.300, 7.62mm) package. A component of this electronic system has been mounted in the direction of Through Hole. Packaged in a way consistent with Tube. An electrical device of this type is designated as Volt to Frequency and Frequency to Volt. Termination in 14 refers to the practice of terminating a transmission line with a device that matches the characteristic impedance of the line. In addition, it is equipped with a pin count of 14. A supply voltage of 15V supplies power to the device. Parts that are related to the base part number can be identified. The 14 pins of a computer or other communication device are pronged contacts that provide a signal interface. The temperature at which the device operates must not exceed 0°C in order for it to ensure reliability. As a precaution, it operates at the maximum operating temperature of 70°C in order to maintain its reliability. A Through Hole mounting is used. A frequency of 500kHz is used for its operation. It is necessary to supply 8mA with a current so that it can fully perform its function. Electronic parts with a maximum input type of 10V are available. There is a voltage of 15V on the operating supply of this electrical device. Power is supplied by a dual supply voltage of 15V. Support is provided for the output voltage of 400mV. An electrical device of this type has a bandwidth of 500 kHz.
ADVFC32KNZ Features
14-DIP (0.300, 7.62mm) package
14 terminations
14 pin count
14 pins
A dual supply voltage of 15V
ADVFC32KNZ Applications
There are a lot of Analog Devices Inc.
ADVFC32KNZ V/F & F/V Converters applications.
- Speed Governors
- Cruise Control
- Automotive Door L ock Control
- Clutch Control
- Horn Control
- Touch or Sound Switches
- lsolation of High Common-Mode Voltages
- Low-Cost Analog-to-Digital Conversion
- Battery Monitoring
- Automotive Sensing
