TC9401CPD Overview
This package is embedded in the 14-DIP (0.300, 7.62mm) package. Electronic part Through Hole is mounted in this way. There is a package in the way of Tube. In this case, an electrical device of type Volt to Frequency and Frequency to Volt is being used. The 14 termination of a transmission line is the practice of terminating it with a device whose characteristic impedance matches that of the transmission line. Devices equipped with a 14 pin count are available. Providing power to the device is a supply voltage of 5V. It is possible to discover parts that are related to the base part number. When a computer or other device is connected to the Internet, there are 14 pins, which are pronged contacts. For its reliability, it operates at a minimum operating temperature of 0°C. To ensure reliability, the device operates at a maximum operating temperature of 70°C. Through Hole mounted in the way. The supply voltage (Vsup) should be greater than 8V if it is suitable for use. As a result, 15V is reaching its maximum supply voltage (Vsup). There is a frequency 100kHz that it operates at. There is a voltage of 12V at which this electrical device operates. A dual supply voltage of 5V is used to power it. The type of supply for this electronic component is Single, Dual. The device is capable of producing an output voltage of 18V.
TC9401CPD Features
14-DIP (0.300, 7.62mm) package
14 terminations
14 pin count
14 pins
A dual supply voltage of 5V
TC9401CPD Applications
There are a lot of Microchip Technology
TC9401CPD V/F & F/V Converters applications.
- Clutch Control
- Horn Control
- Touch or Sound Switches
- lsolation of High Common-Mode Voltages
- Low-Cost Analog-to-Digital Conversion
- Battery Monitoring
- Automotive Sensing
- Voltage to Frequency Conversions
- Frequency to Voltage Conversions
- Remote-Sensor Monitoring
