SG2524D Overview
With its 16-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control operates at 8V~40V and has a 8V~40V supply voltage. Worked in an dc switcher with a -25°C~85°C TA rating. It can switch at 100kHz~300kHz. A generalization of dc dc regulator can be made using Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. A variety of terminations with 16 of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input is 20V. Other relevant dc to dc converter ics can be found by searching "SG*524". 16 pins are on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended to use 8V as the minimum input voltage of dc dc voltage regulator. The test statistics indicate that DC regulator outputs a voltage of 5V. The dc to dc regulator is limited to 40V input voltage. If you start a project, note down the dc dc regulator's usual output current of 50mA. The maximum duty cycle of this voltage regulator dc to dc is set to 49 % to ensure reliability during power-up and power-down. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. A frequency of 400kHz is set for the switching controller. During dormancy, the dc switching uses 8mA. With a current supply of 7mA, it runs.
SG2524D Features
Transistor Driver Outputs
Switching Frequency: 100kHz~300kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
Frequency: 400kHz
SG2524D Applications
There are a lot of Microchip Technology SG2524D DC to DC converter applications.
- PSRR circuits
- Constant current circuits
- Elevator lighting
- Medical equipment
- Industrial controllers
- Smoke exhaust equipment
- Flaw detection equipment
- Post equipment
- Planers
- Hydraulic presses
