MIC841HYC5-TR Overview
The product is packaged in 5-TSSOP, SC-70-5, SOT-353 to facilitate transportation.Output type Push-Pull is used for this comparator.This device is designed in Tape & Reel (TR) case.It's a typical with Voltage Reference comparator.This element consists of 1 elements in total.The recommended mounting type is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .5 pins are present on the comparator.You may wish to search MIC841 for more solutions that address your specific needs.The comparator presents a quiescent current of 3μA volts.The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 3μA .The compartator could be damaged if the current supply exceeds 10nA .Temperatures above 85°C are not recommended.A temperature lower than -40°C is unsuitable for the device.A comparator is designed to operate at a maximum supply voltage of 5.5V .The comparator is capable of operating at a minimum supply voltage of 1.5V .For the output to be of high quality, 1 channels must cooperate together.Comparator electronics comes from the series of Teeny™ comparator parts.A normal operation requires a voltage of 5V .
MIC841HYC5-TR Features
Push-Pull output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 3μA
MIC841HYC5-TR Applications
There are a lot of Microchip Technology
MIC841HYC5-TR linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Self-diagnostics
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
