AD8611ARZ-REEL7 Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a Complementary, TTL output type for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has a total of 8 terminals.The electrical component here belongs to the Comparator family.With a 3V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as with Latch .Electronic comparator has 8 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator has a pin count of 8 .You can find more pin-to-pin solutions by searching AD8611 .As a result, this comparator displays a quiescent current of 4mA .Normally, the nominal supply current should be 10mA when using the device.There is sufficient power to run the device from 3/5V power supplies.You can input a maximum current of 6μA into this device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 69.54dB .
AD8611ARZ-REEL7 Features
Complementary, TTL output capability
with Latch IC
Operates under -40°C~85°C
Quiescent Current: 4mA
Voltage Gain: 69.54dB
AD8611ARZ-REEL7 Applications
There are a lot of Analog Devices Inc.
AD8611ARZ-REEL7 linear comparators applications.
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
