MIC5323-3.3YD5-TR Overview
Cut Tape (CT) cases are used for delivery. The Liner regulator IC is packaged in SOT-23-5 Thin, TSOT-23-5 case. Fixed is the output type of the Voltage Regulator IC. As part of this electrical component, 1 regulators are implemented. Variations are made to the Surface Mount operating temperature range by the Voltage Regulator IC. Default settings are set to -40°C~125°C degrees. There is a Positive configured as the output function for this IC regulator. There is a current output of 300mA from this regulator IC. There are a total of 5 pins on this board. There are 1 outputs total on this voltage regulator IC in order to ensure that prompt and sufficient performance is achieved. There is a dropout voltage of 10 volts on this IC regulator. Chips have 23 pins. For your information, the basic part number for this regulator IC is MIC5323. In this case, we have a typical PMIC - Power Management ICs component. There is one type of regulator for this device, which is FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR. TR is the way in which the voltage regulator IC is packed. In order to meet the operation requirements, its maximal output current reaches 300mA. It operates in the 150μA Quiescent Current state. This IC regulator is a part of the -- Series of devices. You should use the regulator IC when the temperature is below 125°C. It is not possible to operate the chip below -40°C operating temperature. This IC regulator has a tolerance of 2 %, which is quite low.
MIC5323-3.3YD5-TR Features
120mV dropout voltage
PMIC - Power Management ICs subtageroy
TR method of packing
The maximum operating temperature of -40°C
2 % tolerance
MIC5323-3.3YD5-TR Applications
There are a lot of Microchip Technology
MIC5323-3.3YD5-TR Linear Voltage Regulators applications.
- Battery-powered device
- Communication device
- Personal communication device
- Portable telephone
- Electronic notebook
- Camera
- Video equipment
- CPU power supply
- Switching regulator
- Multiple-power supply system
