MIC2595R-1BM Overview
This is included in the 14-SOIC (0.154, 3.90mm Width) package.At present, 1 channels are available.It's packaged in a Tube shape.Device position DUAL is its terminal position.In total, there are 14 pins on it.According to Surface Mount, it has been set up.Electric components of this type are classified as Hot Swap Controller, Sequencer.For reliable operation, set the temperature to -40°C~85°C.Application -48V is available on the device.As you can see in Auto Retry, it's featured.The device should be able to be powered by a -80V~-19VV power source.There are numbers in the MIC2595 family that include it.As far as Power Management Circuits is concerned, this gadget is self-contained.There are Current Limit, Fault Timeout, UVLO features that can be programmed.In the present, there is a shortage of 4mA.Hot-swappable device is important that the supply voltage (Vsup) is kept above 19 V for normal operation of the device.80 V (maximum supply voltage) is set.As far as the power supplies are concerned, the part has the character 48 V.As for the IC, this gadget uses POWER SUPPLY SUPPORT CIRCUIT.Hot Swap can operate at a maximum supply current of 6 mA.The device produces --V as its maximum output.There is a -- series component on this electrical component.
MIC2595R-1BM Features
The terminal position of 14
Features of Auto Retry
Programmable features of Current Limit, Fault Timeout, UVLO
-- series
MIC2595R-1BM Applications
There are a lot of Microchip Technology
MIC2595R-1BM hot swap controllers applications.
- Avionics systems
- Safe board insertion and extraction
- Industrial computers and servers
- Redundant-array-of-independent-disk (RAID) storage
- Other forms of communications infrastructure
- Board or blade insertion into live backplanes
- Backplane
- Loads
- Distributed power systems
- Redundant negative voltage supplies
