MIC2586-1BM TR Overview
This is included in the 14-SOIC (0.154, 3.90mm Width) package.At present, 1 channels are available.It's packaged in a Tape & Reel (TR) shape.Device position DUAL is its terminal position.In total, there are 14 pins on it.According to Surface Mount, it has been set up.Electric components of this type are classified as Hot Swap Controller, Sequencer.For reliable operation, set the temperature to -40°C~85°C.Application General Purpose is available on the device.As you can see in Latched Fault, it's featured.The device should be able to be powered by a 10V~80VV power source.There are numbers in the MIC2586 family that include it.There are Current Limit, Fault Timeout, Slew Rate, UVLO features that can be programmed.In the present, there is a shortage of 2mA.Hot-swappable device is important that the supply voltage (Vsup) is kept above 10 V for normal operation of the device.80 V (maximum supply voltage) is set.As for the IC, this gadget uses POWER SUPPLY SUPPORT CIRCUIT.The device produces --V as its maximum output.By using this device, it is also possible to produce ALSO OPERATES WITH A NOMINAL +48V.There is a -- series component on this electrical component.
MIC2586-1BM TR Features
The terminal position of 14
Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, Slew Rate, UVLO
-- series
MIC2586-1BM TR Applications
There are a lot of Microchip Technology
MIC2586-1BM TR hot swap controllers applications.
- Avionics systems
- Safe board insertion and extraction
- Industrial computers and servers
- Redundant-array-of-independent-disk (RAID) storage
- Other forms of communications infrastructure
- Board or blade insertion into live backplanes
- Backplane
- Loads
- Distributed power systems
- Redundant negative voltage supplies
