MCP1406-E/P Overview
For greater flexibility, its 8-DIP (0.300, 7.62mm) package is used.Tube represents the package.Its recommended mounting way is Through Hole.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.There is a gate type of IGBT, N-Channel, P-Channel MOSFET in this design.There is a temperature range for this device of -40°C~125°C TA.Input type of Inverting is used.Its configuration starts with 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number MCP1406.In this case, Through Hole indicates how the device is mounted.In the device, there are 8 pins.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.An output current as high as 6A can be achieved at maximum power.There are several useful electronic components within its subcategory MOSFET Drivers.Based on its basis, it integrates 1 outputs.6A is the maximum output current supported by the device.For higher stability, the supply current should be kept at 250μA.As a result, a voltage of 18V is produced.
MCP1406-E/P Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP1406-E/P Applications
There are a lot of Microchip Technology MCP1406-E/P gate drivers applications.
- High frequency line drivers
- Motor Drives
- AC-DC Inverters
- Digitally controlled power supplies
- General Purpose 3-Phase Inverter
- Industrial Modules
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Active filtering
- Automotive Applications
