MCP131T-195I/TT Overview
Power management is mounted through 3 terminals. Packaged in the form of a Tape & Reel (TR), power management is easy to use. The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. According to the specification, the package's peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 1. The mount is attached to Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 3. There are 3 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. There is a supply current of 90μA for the power management. It is always advisable to use MCP131, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 90μA can be used.
MCP131T-195I/TT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
90μA operating supply current
MCP131T-195I/TT Applications
There are a lot of Microchip Technology MCP131T-195I/TT Voltage Supervisors applications.
- DVR
- Data storage applications
- Electronics installed in the vehicle
- Urban rail transit weak current power monitoring
- Leakage current detection
- Medical-specific insulation monitor
- Utility meter
- Analog circuit
- Consumer electronics
- Low voltage/high power - AI, GPU
