MAX6423XS31+T Overview
This voltage supervisor has a total of 4 mounting terminals that can be used for mounting. Power management is packaged in a Tape & Reel (TR) way. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels available on this supervisor, and each channel has a different function. For your reference, this PMIC includes a list of SC-82A, SOT-343 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. Power ics operate at 1 supply voltages. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 4 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountThe supervisors should be set to the following temperature: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The supply current of the power management is 2.5μA. It is always advisable to use MAX6423, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6423XS31+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
2.5μA operating supply current
MAX6423XS31+T Applications
There are a lot of Maxim Integrated MAX6423XS31+T Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Radio
- Military electronics
- Telecommunications equipment
- Detection of phase loss
- Analog circuit
- Network equipment
- Electrical fire monitoring system
- Utility meter
- Rechargeable batteries
