MCP112T-315E/MB Overview
There are 3 mounting terminals on the voltage supervisor, each of which has a different function. Tape & Reel (TR)-packaging is used. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of TO-243AA functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. IC management is possible to find a succession of 1 voltages that have been checked. The power management is mounted by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. 3 pins are present in total in this power management. There are 3 pins on the power managment ic. Supply voltage (Vsup) should be at least 1V for this power management. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The power management's supply current is 1.75μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MCP112, which is the base power ics number. The power management can work with a maximum supply temperature of 1.75μA.
MCP112T-315E/MB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP112T-315E/MB Applications
There are a lot of Microchip Technology MCP112T-315E/MB Voltage Supervisors applications.
- Detection of phase imbalance
- Rechargeable batteries
- Radar
- Refrigeration
- Leakage current detection
- Automotive power systems
- Detection of phase loss
- Unattended substation automation
- Dash board
- Smart meter
