BU4826G-TR Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Tape & Reel (TR)-packaging is used. In this PMIC, you can find 1 functions for your reference. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. The supervisor is always powered by a 2.4V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. The mount is provided by Surface Mount. There is a subcategory called Power Management Circuits for this power management. Power management has a total of 5 pins. There are 5 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 700mV. There should be no more than 7V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. There is a 550nA supply current present in the power management. It is always advisable to use BU4826, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 1.23μA.
BU4826G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current
BU4826G-TR Applications
There are a lot of ROHM Semiconductor BU4826G-TR Voltage Supervisors applications.
- Leakage current detection
- FPGA design
- Automotive permanent magnet synchronous motors
- Display equipment
- Computer applications
- Electronics installed in the vehicle
- Radio
- Important electronics for automotive protection
- Network equipment
- Leakage protection
