MXD1818UR23+T Overview
There are 3 terminals connected to this power management, which makes it easy to mount. A Tape & Reel (TR) package is used to package the power management. In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of TO-236-3, SC-59, SOT-23-3 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 3.6V is used to conduct the PMIC chip. Power ics operate at 1 supply voltages. Surface Mount mounts IC management. The power management belongs to the Power Management Circuits subcategory. The total number of pins on this power management is 3. This power management system has 3 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). In this case, Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~105°C TA. During operation, this power management system outputs Open Drain, Bidirectional. For this power management, there is an 9μA volt supply current. It is always advisable to use MXD1818, the base supervisor number, when searching for similar PMICs from the manufacturer.
MXD1818UR23+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
9μA operating supply current
MXD1818UR23+T Applications
There are a lot of Maxim Integrated MXD1818UR23+T Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Military communications
- Transformer load monitoring equipment
- Magnetic resonance imaging
- Important electronics for automotive safety
- Solar power charger
- FPGA design
- Functional modules
- Electric heating appliances
- Embedded computing
