BU4325G-TR Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tape & Reel (TR) model. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Manage ics operate at 2.4V supply voltages. During operation, the power ic is supplied with a voltage of 1. Power management is included in the Surface Mount mount. There is a subcategory called Power Management Circuits for this power management. Power management has a total of 5 pins. This power management has 5 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 700mV, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 7V volts. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. To find similar IC managements from the manufacturer, you can always search by BU43*. The power management can work with a maximum supply temperature of 1.75μA.
BU4325G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4325G-TR Applications
There are a lot of ROHM Semiconductor BU4325G-TR Voltage Supervisors applications.
- DSP
- Medical-specific isolation transformer
- Telecommunications equipment
- Satellite navigation
- FPGA design
- Military electronics
- Transformer load monitoring equipment
- Analog circuit
- Unattended substation automation
- External alarm
