MAX9320EKA+T Overview
The clock divider is packaged in a SOT-23-8 case. The package is in the form of a Tape & Reel (TR). It is normal to operate with a value of 3GHz. A total of 8 terminations have been found in it. The supply voltage of 2.5V can be used to achieve high efficiency. As a result, it will be mounted by Surface Mount in this case. Electrical components classified as Fanout Buffer (Distribution), Data are classified as such. Setting the temperature to -40°C~85°C will ensure reliable performance. Ideally, it should be able to operate from 2.25V~3.8V volts. It has a number of pins of 8. There is a value of LVECL, LVPECL as the output. I have enclosed this circuit clock in Clock Drivers for your convenience. This value is set to 3.8V for the maximum available supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be kept above 2.25V. There is a +-2.25/+-3.8V volt supply that powers the timeing clock. With the help of this gadget, it is also possible to obtain CAN ALSO OPERATES FROM -2.25V TO -3.8V SUPPLY IN LVECL MODE.
MAX9320EKA+T Features
8 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
MAX9320EKA+T Applications
There are a lot of Maxim Integrated MAX9320EKA+T Clock Buffers & Drivers applications.
- High-performance workstation
- Medical imaging
- High-end consumer electronics
- Oscilloscope and logic analyzer front ends
- Line receiver and signal recovery
- Furniture
- Tower server
- Data center
- High-performance server
- Fibre channel (FC)
