CDCLVC1104PW Overview
There is a case option of 8-TSSOP (0.173, 4.40mm Width) available for this clock divider. It is packaged as a Tube. A total of 8 terminations are present in it. With a voltage of 2.5V, high efficiency is possible. The mount is made up of Surface Mount. An electronic component classified as Fanout Buffer (Distribution) is categorized as such. If you wish to ensure reliable performance, you should set the temperature to -40°C~85°C. Ideally, it should be able to operate from 2.3V~3.6V volts. Surface Mount is placed within the way of this object. There are 8 pins on the clock buffer. In order for the timeing clock to operate, it is connected to the 8 pins. As a member of the CDCLVC1104 family, it falls under that category. There is a cut smart buffer contained in Clock Driver that is used for this purpose. The buffer IC belongs to the CDC family. There is 2.7V maximum supply voltage (Vsup). In order for the supply voltage (Vsup) to stay above 2.3V, it should be kept as high as possible. By default, the output of the circuit clock is set to 4. It is powered by a 3.3V volt supply. Despite its low frequency 250MHz, it maintains excellent accuracy.
CDCLVC1104PW Features
8 terminations
The operating temperature of -40°C~85°C degrees
Clock Driver subcategory
at 250MHz frequency
CDCLVC1104PW Applications
There are a lot of Texas Instruments CDCLVC1104PW Clock Buffers & Drivers applications.
- Switch
- High performance communication system
- Patient diagnosis
- Gigabit Ethernet (GbE)
- Machine made
- DDR4 JEDEC standard RDIMM design
- Base station
- Backplane
- Synchronous digital system
- Internet of Things
