MAX9320BEUA+T Overview
It is package in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. It is packaged as a Tape & Reel (TR). In normal operation, the maximum value is set to 3GHz. There are 8 terminations in it. With a supply voltage of 5V, high efficiency is possible. If this is the case, it will be mounted as Surface Mount. Electronic components classified as Fanout Buffer (Distribution), Data fall into this category. If you wish to ensure reliable performance, you should set the temperature to -40°C~85°C. It should be able to work with a power source of 3V~5.5VV. It is located in the way of Surface Mount. The clock buffer contains 8 pins. The output of it is ECL, PECL, LVECL, LVPECL. The 8 pins are used for operation. This is set to 5.5V for the maximum supply voltage. As a rule, the supply voltage (Vsup) should be kept above 3V for normal operation. In addition, ECL/LVECL MODE: VCC = 0 V WITH VEE = -3 V TO -5.5 V can be obtained when using this gadget.
MAX9320BEUA+T Features
8 terminations
The operating temperature of -40°C~85°C degrees
MAX9320BEUA+T Applications
There are a lot of Maxim Integrated MAX9320BEUA+T Clock Buffers & Drivers applications.
- Peak detection
- Data center
- Consumer Electronics
- Machine made
- Backplane
- Tlecom applications
- Cell Phone (UMTS/WCDMA/GSM)
- Furniture
- Wired communication field
- Mobile Internet Device (MID)
