PI49FCT32802QE Overview
There is a case available for the cut smart buffer in 16-SSOP (0.154, 3.90mm Width). It is available in the case Tube. It is recommended that the maximum value for normal operation is 133MHz. A total of 16 terminations are present. With a supply voltage of 3.3V, high efficiency is possible. The mount is made up of Surface Mount. This electronic part is classified as Fanout Buffer (Distribution). It is recommended to set the temperature to -40°C~85°C in order to ensure reliable performance. The clock switch should operate with a voltage of 2.97V~3.63VV. There is a place for it in the way of Surface Mount. Buffer IC is CMOS, TTL that is output. It is operated using the 16 pins. This is a member of the 49FCT32802 family. The clock divider is located in Clock Drivers. The buffer IC belongs to the FCT family. The maximum supply voltage (Vsup) has been set to 3.63V. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 2.97V. It is set to output 5 by default. A electronic part of this series belongs to the 49FCT family. The supply voltage should be kept at 3.3V in order to obtain maximum efficiency. There is no external influence on it, as it consumes 100nA quiescent current.
PI49FCT32802QE Features
16 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
PI49FCT32802QE Applications
There are a lot of Diodes Incorporated PI49FCT32802QE Clock Buffers & Drivers applications.
- Global positioning system (GPS)
- Data transmission
- Data center
- Line receiver and signal recovery
- Internet of Things
- Computing
- Mobile Internet Device (MID)
- Tlecom applications
- Radar
- Clock signal format conversion
