MAX901AESE+ Overview
The product is packaged in 16-SOIC (0.154, 3.90mm Width) for ease of transportation.There is a comparator of type TTL output on this device.The part will be shipped by Tube .You can find 16 terminals of the comparator.The electrical component in this case belongs to the Comparator families.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.The type of the chip can be classified as General Purpose .There are a total of 4 elements in it.The device includes 16 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator is equipped with 16 pins.You can find more pin-to-pin solutions by searching MAX901 .The comparator presents a quiescent current of 15mA volts.The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current for the device be set to -12mA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds -12mA .In order to run the device, there are only 55/10GND/-5V power supplies required.The operating supply voltage for normal operation should be 9V .
MAX901AESE+ Features
TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 15mA
MAX901AESE+ Applications
There are a lot of Maxim Integrated MAX901AESE+ linear comparators applications.
- System control and monitoring
- Set Top Boxes
- High-Speed Differential Line Receiver
- Metering Systems
- Automatic Test Equipment
- Analog front end
- Handheld Instruments
- Alarm and Monitoring Circuits
- Point of load regulators
- Current and voltage sensing
