MAX941ESA+ Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, Push-Pull, TTL output on this device.The chip is packaged with Tube .The device is designed with 8 terminations.The chip belongs to Comparators .A comparator supplied with 3V voltage can complete many demanding tasks.Electronic comparator can be classified as a with Latch, Shutdown chip.The board includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .This comparator has 8 pins.In case you are looking for more pin-to-pin solutions, you may want to search MAX941 .A quiescent current of 700μA is displayed by this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires 700μA supply current.If the current supply exceeds 700μA , the comparator might be damaged.This device requires 3/5V power supplies to operate.
MAX941ESA+ Features
CMOS, Push-Pull, TTL output capability
with Latch, Shutdown IC
Operates under -40°C~85°C
Quiescent Current: 700μA
MAX941ESA+ Applications
There are a lot of Maxim Integrated
MAX941ESA+ linear comparators applications.
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
- Limit Comparators
