Welcome to Hotenda.com Online Store!

logo
userjoin
Home

MAX8212MSA/PR

MAX8212MSA/PR

MAX8212MSA/PR

Maxim Integrated

5V8 Terminals 8-Pin MAX8212 Voltage supervisor1 Channels Min 2V Max 16.5V

SOT-23

MAX8212MSA/PR Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Operating Temperature-55°C~125°C TA
PackagingTube
Published 2008
Pbfree Code no
Part StatusObsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Subcategory Power Management Circuits
Max Power Dissipation471mW
Technology CMOS
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 225
Number of Functions 1
Supply Voltage 5V
Base Part Number MAX8212
Output Open Drain or Open Collector
Pin Count8
JESD-30 Code R-PDSO-G8
Power Supplies5V
Number of Channels 1
Max Supply Voltage16.5V
Min Supply Voltage2V
Max Supply Current 15μA
Adjustable Threshold YES
Watchdog TimerNo
Reset Active Low
Voltage - Threshold Adjustable/Selectable
Number of Voltages Monitored1
Reset Timeout <1ms Minimum
Min Reset Threshold Voltage 1.11V
Max Reset Threshold Voltage 1.19V
Threshold Voltage +1.15V
Length 4.9mm
Width 3.9mm
RoHS StatusROHS3 Compliant
In-Stock:3004 items

MAX8212MSA/PR Product Details

MAX8212MSA/PR Overview


There are 8 terminals on this power management that allow it to be mounted. Power management is packaged in a Tube way. Power management is possible to find a series of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 225. During operation, the power ic is supplied with a voltage of 5V. IC management conducts in a 1-voltage supply. The mount is provided by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. The total number of pins on this power management is 8. A voltage (Vsup) that doesn't fall below 2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 16.5V volts. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -55°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. To find similar IC managements from the manufacturer, you can always search by MAX8212. This power management requires 5V power to work. The maximum supply temperature that PMIC chip can work with is 15μA.

MAX8212MSA/PR Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 2V

MAX8212MSA/PR Applications


There are a lot of Maxim Integrated MAX8212MSA/PR Voltage Supervisors applications.

  • Medical-specific insulation monitor
  • Electronics installed in the vehicle
  • Power distribution systems of infant care room
  • Military communications
  • Precision measurement
  • DVR
  • Automotive permanent magnet synchronous motors
  • Satellite navigation
  • Data storage applications
  • Power distribution systems of operating room

Get Subscriber

Enter Your Email Address, Get the Latest News